Interestings - News

12 - 2011
Metal cabinet / control panel for machine tools

• Dimensions: ca. 1540 x 1530 x 460 mm
• Dead Weight: ca. 190 kg
• Sheet Thicknesses: 2,5 - 6 mm
• Materials: St-Blech
• Surfaces: primed and light gray lacquered

11 - 2011
Reservoir with about 7500 ltr. volume

• Dimensions Behälter: Da 1600 x 6 mm, GH 4300 mm mit Standzange
• Dead Weight: ca. 2350 kg
• Sheet Thicknesses: 6 - 20 mm
• Torispherical: both 6 mm thickness
• Materials: S235 JRG2
• Surfaces: Inside raw, Outside primed

10 - 2011
Oil tank with oil drip pans with about 1800 ltr. volume

• Dimensions Behälter: 2600 x 1100 x 800 mm, GH 1060 mm
• Dimensions Wanne: 3600 x 2000 x 280 mm
• Dead Weight: ca. 1337 kg
• Sheet Thicknesses: 4 - 15 mm
• Surfaces: Inside and Outside zincprimed and lacquered

10 - 2011
Oil tank with oil drip pans with about 160 ltr. volume

• Dimensions Behälter: 1176 x 610 x 370 mm, GH 1200 mm
• Dimensions Wanne: 1670 x 810 x 200 mm
• Dead Weight: ca. 132 kg
• Sheet Thicknesses: 3 - 15 mm
• Surfaces: Inside raw and Outside zincprimed and lacquered

09 - 2011
Agitator / template-tank with about 10.000 ltr. volume

• Dimensions Behälter: Da 2200 x 12 x 3000 mm hoch
• Dead Weight: ca. 3385 kg
• Sheet Thicknesses: 12 - 20 mm
• Torispherical: 14 mm thickness
• Werkstoff: S235 JRG2
• Surfaces: Inside and Outside primed

08 - 2011

Agitator with a volume of 500 ltr.
piped and wired on Slide-tub

• Agitator: Da 910 x 5 x 1000 mm high, outside isolated
• Operating temperature 70° C
• Dimensions: 2000 x 1300 x 2100 mm total heigh
• Dead Weight: ca. 622 kg
• Sheet Thicknesses 2 – 12 mm
• Materials: S235 JRG2 und Cr Ni Stahl 1.4301
• Surfaces:
  Agitator inside raw, outside primed and lacquered
  Reservoir stained and passivated

07 - 2011

Oil tank with a volume of 130 ltr.
mounted on sliding oil pan

• Dimensions: 1200 x 800 x 1360 mm total heigh
• Dead Weight: ca. 220 kg
• Sheet Thicknesses 3 – 12 mm
• Materials: S235 JRG2
• Surfaces:
  Tank: inside raw, outside primed and lacquered
  Pan: inside and outside primed and lacquered

07 - 2011
"Healthy companies run longer!"
2nd Neumarkt Corporate Challenge

This year the S & D Team participate 2nd time: on 21/07/2010 at 18:30 clock the S & D Team started the 2nd Company run - a 5700 meters street circuit - with the following six runners:

Results:

- Gehr, Josef                       33:57,7 min,  position 665
- Seßler, Manfred                 33:58.7 min,  position 669
- Lautenbacher, Katrin          34:00,6 min,  position 673
- Dietmayr, Julia                  34:36,1 min,  position 706
- Seßler, Julia                     35:45,9 min,  position 762
- Samberger, Edeltraud        37:32,0 min,  position 839
 
The fastest company-leaders:
 
- they ranged from                21:10,4 min,     position 1
- Seßler, Manfred                 33:58,7 min,   position 68
- and the most slowly         61:37,2 min,     position 109   
 
 
The entire number of participants (runners and walkers) was between 18:52,4 min at 1206 valuations. to approx. 63:46,1 min. Walk or run-time.

"Healthy companies run longer" - again under the same slogan the local concentrated economic power was up and running! For healthy, productive and motivated employees are the pillars of a good company. Healthy, productive and motivated companies are the pillars of the region.
 
Bosses, employees, officers, employees, apprentices and trainees from companies, government agencies, associations, clubs, schools, kindergartens, medical facilities - there was no limitation of participants.
 
The focus of the event was not the competition, but the idea of community and the Olympic motto "Be there - that's all".
 
After the 5.70 km run all the participants, their families and fans and their business partners and colleagues expected a wonderful after-run & work party with delicious food, drinks and live music.

07 - 2011
Investment in PV System
From July 2011 we will actively contribute to environmental protection and can help us from the sun.

We cover about 30-35% of our electricity needs with solar energy.

We believe:
"Clean and renewable," that's the future.

Application::

• PV-System: 99,82 kWp with consumption use
• Numbers of Inverters: 7 pieces
• Numbers of Modules: 434 pieces crystalline
• Alignment: West-South-West
• Roof pitch: 10°
• Total area: ca. 698 qm
• Current yield: ca. 90.000 kWh / year
• CO2 Reduction: ca. 58.410 kg / year
• Assembly plant: ILIOTEC Solar GmbH, www.iliotec.de
• Elevation: Seßler & Dietmayr GmbH
  • 65 mtr x 12 mtr x 3,5 mtr high
  • Steel construction made of S235 JR

06 - 2011
Oil tank and pan with a volume of 4000 ltr each

Oil Tank:

• Dimensions: 2680 x 1940 x 1020 mm high
• Sheet Thicknesses: 3 - 15 mm
• Dead Weight: ca. 1015 kg
• Materials: S235 JR
• Surfaces: inside primed and outside lacquered
  

Oil Pan:

• Dimensions: 3750 x 2950 x 425 mm high
• Sheet Thicknesses: 4 - 20 mm
• Dead Weight: ca. 635 kg
• Materials: S235 JR
• Surfaces: inside primed and outside lacquered

05 - 2011
Water-cooled gas line DN 150
with jacket DN 200

• Dimensions: DN 150/168,3 x 2500 mm long
• Sheet Thicknesses: 3,6 - 10 mm
• Dead Weight: ca. 150 kg
• Materials: S235JR
• Surfaces: inside raw, outside primed heat resistant

04 - 2011
Containers for Citrus - concentrates
with 2700 ltr. Volume

• Dimensions: 1400 x 1400 x 1400 x 1900 mm high
• Sheet Thicknesses: 2 - 8 mm
• Dead Weight: ca. 250 kg
• Materials: Cr Ni Stahl 1.4301
• Surfaces: stained and passivated

Agitators

Plant parts for food and cosmetics